油墨印刷粘度测试及控制作业指导书

产品标识(天津)有限公司Р文件编号Р名称Р版本Р页码/页数Р油墨印刷粘度测试及控制Р作业指导书РA0Р4/5РInsure ink viscosity stably in the printed begin and end moment.Р4.3.4 丝印操作过程中,油墨桶除加墨时桶盖可以打开,其余时间必须处于封闭状态,以保证油墨粘度的稳定。РIn the printed process, the ink barrel must close except go into ink, in order to ensure printing ink viscosity stably.Р4.3.5 新品在量产中,由PE负责跟踪油墨粘度测量范围值及使用状态3批次,确定粘度是否合适并做最终修正。如无异常状态,做签字确认工作。РDuring the new product in the mass-produce, Process engineer track printing ink value information and status three batch. Check up the printing ink tack and correct finally. If the whole shoot was ok, approve the information.Р5.流程图: Flow chart:Р世誉产品标识(天津)有限公司Р文件编号Р名称Р版本Р页码/页数Р油墨印刷粘度测试及控制Р作业指导书РA0Р5/5Р相关文件Related file:Р6.1 DV-1粘度计操作指导书(文件编号 PED/WI01)Р DV-1 inkometer work direction (Documentation Number PED/WI01)Р表格表单(无)Attached: (none)