supplied with suitability Р for manufacturing a specific part. In this case the values given in Table 1 do not apply. The reject tolerances arising --````,`-`-`,,`,,`,`,,`---Р when the material is processed shall not exceed a specific proportion to be agreed at the time of enquiry and order. Р 7.2.3 A reduction in the formability of all the coated products specified in this standard may occur by ageing. Р Therefore it is in the interest of the user to use the products as soon as possible after receiving them. Р 7.2.4 The tensile test values apply to longitudinal test pieces and are related to the test piece cross section Р without coating. РCopyright mittee for Standardization РProvided by IHS under license with CENРNo reproduction working permitted without license from IHS Not for Resale
全文预览
