ance test in accordance with 7.1 Method 1 of EN 27326:1993 for all Р inside diameter sizes and types, the hose lining and cover shall not show any signs of cracking. The Р lining shall be examined by slitting the hose wall. Р 6.7 Bending and crush resistance Р When tested in accordance with annex D at a temperature of (23 ± 2) °C, the ratio T/D shall not Р exceed 1,20 and there shall be no visible signs of kinking. Р 6.8 UV-resistance (xenon arc lamp) Р NOTE A test for resistance to UV and requirements based on ISO 11758 will be added at the first revision of Р this standard, when more experience has been acquired. РCopyright mittee for Standardization --```,``-`-`,,`,,`,`,,`---РProvided by IHS under license with CENРNo reproduction working permitted without license from IHS Not for Resale
全文预览
