基于OSPF路由协议的网络互连___课程设计

R0РF0/0:192.168.0.14/28РS0/0:192.168.0.193/30РS0/1:192.168.0.210/30РR1РF0/0:192.168.0.30/28РS0/0:192.168.0.197/30РS0/1:192.168.0.194/30РR2РF0/0:192.168.0.62/27РS0/0:192.168.0.201/30РS0/1:192.168.0.198/30РR3РS0/0:192.168.0.205/30РS0/1:192.168.0.202/30РR4РF0/0:192.168.0.190/26РS0/0:192.168.0.209/30РS0/1:192.168.0.206/30Р区域1的路由表:Р表4-4区域1的路由器的接口IPР路由器名РF0/0接口IPРF0/1接口IPРS0/0接口IPРR3РF0/0:192.168.1.1/28РF0/1:192.168.1.17/28РR5РF0/0:192.168.1.2/28РF0/1:192.168.1.65/26РS0/0:192.168.1.33/27РR6РF0/0:192.168.1.129/26РF0/1:192.168.1.18/28РS0/0:192.168.1.34/27Р利用DNS服务器实现域名解析进而访问web服务器;Р网络拓扑图如图4-3:Р图4-1网络拓扑图Р4.3路由器的配置信息Р⑴路由器R0的配置信息:Рhostname R0 //将路由器命名为R0Рinterface 0/0Р ip address 192.168.0.14 255.255.255.240 //对接口F0/0分配IP地址Рduplex auto //双工的协商模式为自动Рspeed auto //速率为协商模式为自动Рinterface 0/1 //对接口F0/1分配IP地址